Is your Sunbeam coffee machines not functioning the way it’s supposed to? Before you send it off for Sunbeam coffee machines repairs, it’s important to make sure that the issue isn’t something that could be easily fixed. After all, why spend money on Sunbeam coffee machines repairs when you may not need to?
In this article, we’ll cover 5 easy ways to fix your Sunbeam coffee machines. The following coffee machines issues are the most common and can be easily fixed at home.
Coffee isn’t coming out of my Sunbeam coffee machines
There’s nothing more frustrating than craving your morning coffee and no coffee is coming out! There could be several reasons this is happening. Possible causes for no coffee coming out of your machines include; no water in the reservoir, your coffee grind is too fine, there’s too much coffee in the filter, your machines isn’t plugged in properly or the coffee has been compressed too much.
Before you send your machines away for Sunbeam coffee machines repairs try the following:
- Check the water in the reservoir, if it’s empty add some water
- Check the machines is plugged in and switched on
- Try grinding a medium ground coffee
- Fill your portafilter with less coffee and don’t tamp it too much
If following those steps doesn’t resolve the issue, it’s time to call a professional company like Eastlink Espresso.
Coffee is leaking from the edge of the portafilter
If coffee is leaking around the edge of your portafilter the problem is most likely your coffee machines technique over an issue with the machines itself!
Possible reasons for coffee leaking from the portafilter include; your portafilter isn’t rotated fully into the lock position or you’ve put too much coffee in the filter.
To resolve this issue simply make sure the filter isn’t too full and your portafilter is rotated to the full lock position.
The milk isn’t frothing properly
There are a few reasons why your Sunbeam coffee machines may not be frothing milk properly. This could be because you’ve run out of steam, the milk tube is blocked or the milk you’re using isn’t cold enough.
Before you send off your machines for Sunbeam coffee machines repairs try checking the water tank to ensure there is enough water, make sure your milk is always chilled before frothing and periodically clean the milk reservoir and frothing tube.
The control panel lights on my Sunbeam coffee machines are flashing
This one is a very easy fix! The reason your control panel lights are flashing is most likely because your water tank is out of water. To resolve this issue, simply add more water to the tank.
No need for Sunbeam coffee machines repairs!
The water is not being pulled in from the water reservoir
This issue usually comes up when the water reservoir tank isn’t inserted correctly in the machines. If you’re certain that the tank is inserted correctly and you’re still having issues with water not pulling through, it’s time to call a professional company like Eastlink Espresso.
Call Eastlink Espresso for Sunbeam Coffee
If you’ve tried fixing the problem yourself but you’re still experiencing issues with your Sunbeam coffee machines, it’s time to book it in for a service with Eastlink Espresso.
Give us a call today on 03 9738 2516 and let us help you get your Sunbeam coffee machines making delicious coffee again!